Park Tool - Replacement Jaw Covers For Repair Stand
Regular price
Sale price
$31.90
Unit price
/ per
Tax included.
Shipping calculated at checkout.
Inventory
PARK TOOL - REPLACEMENT JAW COVERS FOR REPAIR STAND
Replacement jaw covers for most Park Tool stands, for full information on clamp covers click here:
MICRO-ADJUST CLAMPS:
- K-1960 (2010-):
The 1960 fits the jaws clamp used on the PRS-25, as well as the 100-3D and 100-5D clamps, as featured on our PCS-4, PRS-2.3, PRS-3.3, PRS-4.2, PRS-4W, PRS-7 and PRS-33.2. The covers are nominally 7cm long.
HOME MECHANIC REPAIR STANDS:
- K-2860 (2019-):
The 2860 fits the jaws on the PCS-9.2, PCS-9.3, PCS-10.2, and PCS-10.3. 2860 jaw covers are almost the exact same shape as the 1960, but thicker, enabling these home mechanic repair stands to clamp tubes as small as 7/8". The covers are nominally 7cm long. -
K-1185K (2004-2018):
The 1185K fits the clamp jaws on the PCS-9, PCS-10, PCS-11 and PCS-12 repair stands. The covers are nominally 9cm long.
ADJUSTABLE/SPRING LINKAGE CLAMPS:
-
K-468B (CURRENT MODEL):
468B are the current clamp covers for the 100-3C, 100-5C, 100-8C, 100-8Y and 100-9C clamps. These are the “standard shop” clamps found on such models as the PRS-2, PRS-2 OS, PRS-2.2, PRS-2.3, PRS-3, PRS-3 OS, PRS-3.2, PRS-3.3, PRS-4, PRS-4 OS, PRS-4.2, PRS-7, PRS-5 and PCS-4. The covers are nominally 10cm long. -
K-468G (PCS-1 & PCS-2):
The 468G fit the clamps of the 100-1C, 100-1CA, and 100-2C. These were the clamps on the final generation of the PCS-1. Jaw covers are colored gray. The covers are nominally 10cm long. NOTE: Use care not to confuse the 468G with the 467G jaw covers. The two are not interchangeable. -
K-467B (PRS-3 & PRS-2 - SINGLE CABLE RELIEF):
The 467B fits older 100-3C, 100-5C and 100-8C clamps. These older generation clamps were used on older shop stands such as the PRS-3 and PRS-2. The covers are nominally 10cm long. -
K-467G (PCS-1 - SINGLE CABLE RELIEF):
The 467G fits the clamps of the older versions of the 100-2C clamps. These were the clamps of the early generation of the PCS-1. The covers are nominally 10cm long.
EXTREME RANGE CLAMPS:
- K-1259 (2004-2015):
The 1259 fits the clamp jaws of the 100-4X, 100-6X, 100-7X, and 100-15X (used on the PRS-15). The cover is held in place by two studs protruding through the clamps. The studs are held with clips. The covers are nominally 9cm long. -
K-1002 (2001-2003):
The 1002 fits the clamp jaws on the 100-3X and 100-5X extreme range clamps. The cover is held in place by two studs protruding through the clamps. The studs are held with clips. The covers are nominally 9cm long.